The Arctic Cooling 12 PRO fan outperforms other 120mm fans on the market, in regards to its performance and noise ratio. With efficient central cooling, the Arctic Cooling 12 PRO fan offer excellent cooling and noise control performance for your system.
Best Noise-Performance Ratio:
The Arctic Cooling 12 PRO fan delivers unbelievably quiet performance. The key to this performance is the patented vibration absorption of theArctic Cooling 12 PRO fan. This sophisticated feature absorbs vibration, caused by the motor of the fan. This way, the vibrations can’t be transmitted to the PC Case and other components.
Installation can never be easier. Users can mount the Arctic Cooling 12 PRO fan on the PC case by the four screws provided. Alternatively, the fan can be installed with screwless mounting mechanism provided in the chassis.
Product Dimensions (L x W x H): 120 mm
Fan Speed: 1500 RPM
Air Flow: 54 CFM / 91.7 m3/h
Bearing: Fluid Dynamic Bearing
Noise Level: 0.5 Sone
Current / Voltage: 0.16A/ 12
Net Weight: 140 g
Limited Warranty: 6 years
The Arctic Cooling Freezer 7 PRO Rev.2 is a desirable replacement for your generic AMD or Intel stock cooler on account of the enhanced cooling performance and lowered noise level.
The unique heatsink design of Freezer 7 PRO Rev.2 consists of 3 double-sided heatpipes and 45 aluminum fins providing an impressive efficiency in heat dissipation. Together with a 92mm PWM fan, the Freezer 7 PRO Rev.2 performs far beyond stock coolers and achieves 150 Watts cooling capacity.
As a combined result of the low-noise impeller, patented fan holder design and vibration absorption rubbers, the 92 mm PWM controlled fan generates only 0.5 Sone even at full speed (2,200 RPM), let alone the PWM controlling system smartly optimizes the fan speed and thus lowers the noise level.
The flexible mounting mechanism allows you to mount the Freezer 7 PRO Rev.2 in 4 directions for Intel Sockets and 2 directions for AMD Sockets to fulfill different air flow preferences. (In case other mounting direction is required for AMD Sockets, please consider theFreezer 64 PRO which is a dedicated product for AMD Socket applications while all 4 mounting directions are feasible.)
4 Mounting Directions for Intel Sockets
2 Mounting Directions for AMD Sockets
The mounting mechanism offers excellent stability and it is applicable within a few seconds. The pre-appliedARCTIC MX-2 thermal compound further supports a quick and clean installation.
Freezer 7 PRO Rev.2 is compatible with:
AMD Sockets FM2, FM1, AM3+, AM3, AM2+, AM2, 939 and 754
Intel Sockets 1366, 1155, 1156 and 775
Introducing ArctiClean, the first retail product to emerge from the union of Arctic Silver and Nanotherm technology. ArctiClean is a two step cleaning process that removes existing thermal grease or pads and prepares the thermal surface for a fresh application of thermal interface material.
Unique 2 Step Process: ArctiClean 1 thermal material remover quickly emulsifies and dissolves the existing thermal grease or pad from the CPU or heatsink so that it can easily be removed with a clean cloth or paper towel. A few drops of ArctiClean 2 Thermal Surface Purifier and some gentle wiping then removes the remaining residue and inhibits flash corrosion on copper or aluminium.
ArctiClean 1 Thermal Material Remover
ArctiClean 1 uses a proprietary combination of non toxic biodegradable solvents to emulsify thermal greases or thermal pads. The citrus and soy based solvents in ArctiClean 1 match or exceed many hazardsous and volatile solvents such as fluorinated and chlorinated organic solvents, acetone, MEK (methyl ethyl ketone), mineral spirits, isopropyl alcohol and toluene.
ArctiClean 2 Thermal Surface Purifier
The cationic surfactants in ArctiClean 2 remove any residue left by the ArctiClean 1 leaving a pristine surface for the application of a new thermal interface material. It also incorporates advanced flash corrosion inhibitors that minimise the corrosion layer on copper and aluminium allowing for more intimate contact between the thermal interface material and the heatsink.
Using ArctiClean 2 With Other Solvents
Most solvents and cleaning products leave residue on the CPU and heatsink that negatively affects the performance of any subsequently applied thermal interface material. ArctiClean 2 Thermal Surface Purifier removes the residue of citrus or petroleum based cleaners and inhibits flash corrosion on a copper or aluminium heatsink.
Why not just use isopropyl alcohol or acetone?
Put isopropyl alcohol or acetone on a thermal pad and ten minutes later you will STILL have a thermal pad. Only with a lot of rubbing and scrubbing will you be able to remove the pad. While the alcohol or acetone may soften the pad, neither actually dissolves the pad. Although less visible, it is the same cleaning thermal greases with alcohol or acetone.
ArctiClean 1 totally emulsifies thermal pads and thermal greases. The waxes, oils and fillers of the thermal material are suspended within the ArctiClean 1 so they can be cleaned off completely. This emulsification allow ArctiClean to remove the thermal material in the microscopic imperfections in the heatsink or heat spreader that non emulsifying cleaners cannot touch.
The flash corrosion inhibitors in ArctiClean 2 then significantly reduce the corrosion layer on the copper or aluminium, improving the interface between the metal and the new thermal material and maximising thermal transfer.